+

Raspberry Pi 4B Argon One M.2 Aluminum Case with M.2 SATA SSD Expansion Slot GPIO Cover Cooling Fan for Raspberry Pi 4 Model B

Category : Computer & Office
USD 42.75USD 75.00

Raspberry Pi 4B Argon One M.2 Aluminum Case with M.2 SATA SSD Expansion Slot GPIO Cover Cooling Fan for Raspberry Pi 4 Model B

Description

Raspberry Pi 4B Argon One M.2 Aluminum Case with M.2 SATA SSD Expansion Slot GPIO Cover Cooling Fan for Raspberry Pi 4 Model B

Introductions:

Argon 40 chose an aluminum Case around the Raspberry PI to provide additional functions for the PI. The latest Argon One M.2 of the Argon One series, it looks exactly the same as other Argon box, but some of you will notice that it is slightly taller. Argon One M.2 has a plastic lifting base, where we found an M.2 SATA to USB carrier board, which provides an SSD interface to enable our Raspberry PI to boot from the SSD. Argon One M.2, just like the previous Argon M.2, it has an angular appearance. The aggressive lines on the top of the aluminum chassis provide a sleek aesthetic for the relatively large chassis, measuring 4.1 x 3.6 x 1.5 inches (105 x 93 x 39 mm). In the case of the front and side, we did not see the slots or ports, on the contrary, Argon ONE M.2 follows the design aesthetics of the previous model and routes all the ports to the rear. All of our usb ports and ethernet jacks are facing back. your Raspberry PI 4 will have two full-size HDMI ports, a USB C port and headphone jack. On a plastic lifting base, we see an additional USB3.0 port, which is used to connect the internal M.2 SATA drive to the PI's USB.

Features:

The Argon ONE M.2 Case ups the ante by providing (1) two full-sized HDMI ports (2) Power Management Modes that allows for automatic booting (3) Built-in IR support with streamlined options for configuration and (4) Integrated M.2 SATA SSD support through the USB 3 Ports of the Raspberry Pi 4. Argon ONE M.2 Case extended support for M.2 SATA SSDs allows you to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card. Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive. It is compatible with any M.2 SATA SSD with Key-B and Key B&M.

M.2 SATA SSD to USB3.0 Board Features:

1. Accepts M.2 SSD NGFF Key B and Key B+M 2. SSD size : NGFF M.2 2280 2260 2242 2230 3. Chipest: ASMedia Technologies - ASM1153E 4. Compliant with USB 3.0 Specification Revision 1.0 5. Up to 6 Gbps transfer speeds

M.2 SATA SSD Compatibility

Accepts any size of M.2 SATA SSD with Key-B or Key-B&M. Not compatible with M.2 NVME storage drives.

UASP Supported for Raspberry Pi 4

Maximizes the high speed data transfers for Raspberry Pi 4

Two Full-Sized HDMI

Improves the dual-monitor support of the Raspberry Pi 4 for its video input Please use standard quality HDMI cable for this case.

Power Management Modes

Offers 2 power management options with automatic booting or “Always ON Mode”

Built-in IR Support

Programmable IR support to the Raspberry Pi with streamlined options. Works out of the box with the Argon ONE Remote.

Active Cooling

Software Programmable 30mm FAN via the Argon ONE software

Passive Cooling

Aluminum alloy top case acts as a giant heatsink connected to the CPU of the Raspberry Pi 4

Cable Management

Repositioned all ports to the back of the Raspberry Pi 4 to highlight its sleek and modern design.

Magentic Removable Top & Access to GPIO

Extending the GPIO pins to use the case in multiple projects. And it specially has a magentic removable cover for the GPIO hole , so that you can close the GPIO hole

Packing List:

Case

1 x Argon ONE M.2 Case 1 x Instruction Manual 1 x Video/Audio PCB Extender 1 x GPIO-Fan PCB HAT 1 x Silicon Thermal Pads (Not include the Raspberry Pi board !!!)

Case with Power Supply

1 x Argon ONE M.2 Case 1 x Instruction Manual 1 x Video/Audio PCB Extender 1 x GPIO-Fan PCB HAT 1 x Silicon Thermal Pads 1 x 5V 3A Power Supply (Not include the Raspberry Pi board !!!)

Case with Power Supply and SD Card

1 x Argon ONE M.2 Case 1 x Instruction Manual 1 x Video/Audio PCB Extender 1 x GPIO-Fan PCB HAT 1 x Silicon Thermal Pads 1 x 5V 3A Power Supply 1 x SD Card ( 16GB/32GB/64GB/128GB Option) (Not include the Raspberry Pi board !!!)

Case with 128G SSD:

1 x Argon ONE M.2 Case 1 x Instruction Manual 1 x Video/Audio PCB Extender 1 x GPIO-Fan PCB HAT 1 x Silicon Thermal Pads 1 x 128GB M.2 Sata SSD 1 x Screws Driver ( not inlcude Raspberry Pi)

Case with 512G SSD

1 x Argon ONE M.2 Case 1 x Instruction Manual 1 x Video/Audio PCB Extender 1 x GPIO-Fan PCB HAT 1 x Silicon Thermal Pads 1 x 512GB M.2 Sata SSD 1 x Screws Driver ( not inlcude Raspberry Pi)

How to Assemble

(Not Include Raspberry Pi)

About Feedback:

If you are satisfied with our service and product, We expect the positive feedback and 5 stars of detailed seller Rating, We will do the same for you. if you have any problem or not satisfied with our product and service, please feel free to contact us at anytime before leave other feedback, we will reply you within 24 hours. Thank you! Enjoy shopping here!

About Shipment:

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders processed timely after the payment verification. 3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 5. If you have not received your shipment within estimated days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 6. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery. 7. Delivery Time: Please contact us for more details.

Return & Refund

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half. 2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return. 3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement. 4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

About Payment:

We accept Escrow .You could use Visa and Mastercard,T/T,Western Union,Moneybookers through Ecrow.

Specification

Brand Name : Caturda

Accessory Type : Cases

Compatible With : Raspberry Pi 4

Origin : CN(Origin)

+