+

Rack Mount Patch Panel 100 Mbps 16 Port PoE Midspan Passive POE Injector IEEE802.3af/at

USD 47.90USD 51.50

Rack Mount Patch Panel 100 Mbps 16 Port PoE Midspan Passive POE Injector IEEE802.3af/at

Description

Rack Mount  Patch Panel 100 Mbps 16 Port PoE Midspan Passive

POE Injector IEEE802.3af/at

10/100, Mode B, rack mount 16 Port Injector without a power supply

 

 Power an IP camera, desktop phone, WiFi access point, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from a DC power source (power supply sold separately) and adds it to your Ethernet data cable (Cat5, Cat5e, Cat6) to your device.

Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.

Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.

Simple, Reliable, and Supported By Experts We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, please contact us, we will provide the best solution and service.

16-port-Poe-panel-for802

Specification

DC plug or 3 Pin wire input, 16 Lan port, 16 POE port, shielded

For IP camera, IP phone, WiFi, Access point, etc. 

Over current, over voltage, short circuit protection.

FCC CE RoHS certified.

Rack-mountable

LED indicator:

POWER OFF     --Off                    0 to 400mA  --Green                    >400mA    -- Red                                                                                                        

Input

12-56V DC 2.1MM

Output

12-56V PER PORT (48 watt max each port)

Data

1/2&3/6

Power

4/5 V+ & 7/8 V-

Data In

Connects PC/HUB/Switch/Rotuer

Weight

800g

Type

16 port POE injector panel rack-mout

Ethernet Cable

TIA/EIA 568 Cat. 5/5e/6/6e

Data rate

10/100Mbps

Connector

RJ-45

Operating Temperature

-40°C ~ 70°C

Storage Temperature

-40°C~+70°C

Operating Humidity

10%~80%RH

Storage Humidity

5%~90%RH

Certification

CE , FCC, RoHS

 

Features                                                                               

·         16 port POE Power Injector Panel

·         16 LAN ports, 16 LAN+Power(POE) ports, shielded

·         48 watt max each port, resettable fuse on each port

·         Power VOIP phones, IP Cameras, WiFi Access Points, and more PDs

·         Same voltage to all ports

·         2.1mm x 5.5mm for DC plug, and 3 Pins of wire Jack.

·         LED power light

·         Works with any ethernet switch or router, add POE to any switch or router

·         Use any power supply to 48 volts, 24 volt, 12 volt, according to your need

·         Metal case

Picture Show                                                                          

16 B

 

 

6161123

 

 

 

 

 

 

 

 

 

 

 

Specification

Brand Name : zhangqing

Model Number : ZQPOEI016

Input : 100-240V AC 50/60Hz

Output : 12 TO 48 V 120W (Min))

Data : 1/2&3/6

Power : 4/5 V+ & 7/8 V

Data in Connects : PC/HUB/Switch

PoE Method : Mode B Passive

Dimensions : 482.6mm*44.3mm*25mm

Data rate : 10/100Mbps

Certification : CE/ROHS

Warranty : 12months

+