7 inch Raspberry Pi 4B /3B+/3B Touch Screen 1024*600 800*480 LCD Display Optional Holder also for PC Laptop Nvidia Jetson Nano
This is the 7 inch touch screen with 800x480 and 1024x600 resolution ( can configure up to 1920 x 1080 ) . It can is compatible for Raspberry Pi 4 Model B/3B+/3B , Nvidia Jetson Nano ,PC and laptop. When use for Raspberry Pi. We provide the acrylic holder for the screen so that you can use it in desktop convenient.
Note : The 1024 x 600 screen is IPS , but 800x480 screen is not IPS
1024 x 600 IPS Touch Screen :
1024 x 600 (not IPS) Touch Screen :
8. Provide acylic holder for the screen , for the people use on desktop.
How to Use the Screen :
For 1024 x 600 screen , refer to the link :www.lcdwiki.com/7inch_HDMI_Display-C
For 800 x 480 screen , refer to the link :www.lcdwiki.com/7inch_HDMI_Display-B
Note : Not include Raspberry Pi board
Note: This USBC power adapter is used for Raspberry Pi 4 Model B.
How to use for Raspberry Pi :
How to use for Nvidia Jetson Nano/PC/Laptop
If you have any problem , please contact us at first time.
FAQ1.Question:Why the LCD doesn't work with my Raspbian(Raspberry Pi OS) system ?Answer:To use the LCD with the Raspberry Pi(Raspberry Pi OS)official system , you need to configure the system at first.But for the first testing for the LCD, you had better use the system image we provided directly
2.Quesion:Why the LCD still not work with the system image we provided ?Answer:Please make sure the hardware connection is correct and connects is fine.Make sure you install the system image to SD card correctly.The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the system image was installed incorrectly or the SD card was in bad contact.3.Question:Which power supply should I use?Answer:
When use the LCD for Raspberry Pi, connect the micro USB to Raspberry Pi's USB port can supply power. But please make sure you use a good quality power for Raspberry Pi. ( at least 2.5A for Pi 3B/3B+, 3A for Pi 4B). If the power from Raspberry Pi is not enough, you need to use a extra power adapter to supply power for the LCD.
Brand Name : SHCHV
Accessory Type : LCD Screen
Compatible With : Raspberry Pi / Nvidia Jetson Nano / PC / Laptop
Origin : CN(Origin)
Size : 7 inch
Resolution : 1024 * 600 or 800 * 480
Holder : Acrylic
Ratio : 16:9
LCD type : 1024x600 Screen is IPS ( 800x480 screen is not IPS)