ANYCUBIC 500g/1kg Liquid Photopolymer Resin 405nm UV Resin For LCD 3D Printer Printing Material For Photon/Photon S/Photon Mono
ANYCUBIC 500g/1kg Liquid Photopolymer Resin 405nm UV Resin For LCD 3D Printer Printing Material For Photon/Photon S/Photon Mono X
♦ Hardness: 79 D ♦ Viscosity(25℃): 552 mpa.s ♦ Curing wavelength: 405 nm ♦ Liquid density: 1.1 ♦ Solid density: 1.184 g/cm⊃3; ♦ Shrinkage: 7.1% ♦ Tensile strength: 23.4 Mpa ♦ Curing time: 6-10 s ♦ Elongation at break: 14.2% ♦ Shelf life: 1 year
Terms and Conditions:
Shake well before use,please wear a glove mask,the recommended temperature 20-25 ℃, to avoid dust and the environment.
This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.
It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.
Specifically designed for LCD light source to achieve better printing quality.
Low shrinkage,dimensional stability when printing.The model has high precision and clear details.
ANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time.
Rigid & Toughness
Appropriate toughness.ANYCUBIC UV resins have good combination of hardness and toughness,which brings easy removal of model and fine printing details
Brand Name : ANYCUBIC
Origin : CN(Origin)
Form : Liquid
Model Number : 405nm UV Resin
Main material : resin monomer , photoinit
Viscosity : 552 mpa.s
Curing wavelength : 405nm
Shrinkage : 7.1%
Tensile strength : 23.4 Mpa
Curing time : 6-10 S
Elongation at break : 14.2 %