3D Printer Parts New Magnetic Heat Bed Sticker 150/200/214/220/235/310mm Flexible Plate Tape For Square Heat Bed Surface Sticker
You may like...
Name:1 Set 3D Printer Parts New Magnetic Heat Bed Sticker Flexible Plate Printing Sticker For 150/200/214/220/235 /310mm Square Heat plate Size:150*150mm/200*200mm/214*214mm/220*220mm/235*235mm/310*310mm. Note: In order to facilitate the operation, our top surface is about 2mm larger than the bottom surface. The actual size of the bottom surface shall prevail.thanks. PLA: hot bed temperature 50~80 degree.
1. The product is divided into two sides of the A.B board.（A side:High temperature print layer B side:Low temperature adhesive layer ）. 2. Separate bending to take the model. It is more convenient. 3. No need use the beautiful paper and scrapers to assist remove the printed model from the platform. 4. Can be installed on hot bed and glass platform. 5. Printing does not warp. No glue is needed. 6. Can be printed on a cold bed. 7. The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model 8. PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability 9. A and B board is flat.It can better reduce printing errors and make the printed model more standard.
1.These ranges of temperatures are indicative only, you'll have to test and see what works best for your filament. 2.A:High temperature print layer B:Low temperature adhesive layer 3.Please level the build plate well before printing. 4.Please do not let heated nozzle touch the A plate directly ! 5.Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A by 90 degrees. 6.Please remove the module after printing, if the cooling is too long, the module and the platform will adsorb larger.
Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A by 90 degrees. After finding the strongest and most suitable position, tear open the B-side adhesive, directly attach it to the platform, Be careful to flatten it, and adsorb the A-side printing layer on the B surface without bubbles.
1 Set Square Magnetic stickers(It consists of one A side and one B side, for a total of two pieces.）
Brand Name : IdeaFormer
Origin : CN(Origin)
Item Type : Heat Paper
Model Number : 150*150/200*200/214*214/220*220/235*235/310*310 Magnetic Sticker